"The Buffalo"
cover was conceptualized and invented right in
Buffalo, NY. In fact, it is manufactured today
outside of Buffalo in the small town of Medina,
NY. We have installed this safety cover for years
and find that it holds up to even the toughest
winter weather in Buffalo. A cover that withstands
the snow load and cold climate of Buffalo, will
certainly perform well in your backyard ... wherever
you live. |
|
|
Click to Enlarge Certificate
|
15 Year Warranty
with the Industry's Only 5 Year Guarentee!
- FREE do-it-yourself tool kit with every
order.
- Triple Nylon Stitching.
- Strap Webbing 2800 lbs. Strength.
- Unique 3'x3' grid spacing.
- Commercial grade double stainless steel
springs, 30% stronger than the competition.
The Buffalo Safety Cover comes with a complete
set of step-by-step instructions. |
|
|
"The Buffalo"
Safety Cover is available in custom and stock
sizes.
Available in mesh and solid material.
| Pool
Size |
Estimated
Price |
| 12x24 |
$799.99 |
| 16x32 |
$999.99 |
| 16x36 |
$1179.99 |
| 18x36 |
$1299.99 |
| 20x40 |
$1549.99 |
*Prices
quoted are for typical mesh safety covers.
Some restrictions apply based on overall cover
size and pool configurations.Covers are designed
for rectangle pools with no steps, 3' thick
concrete, and no obstructions. |
Please call 1.800.441.7789
to get an estimate, or to place your order. |
|
|
Quality Features
of The Buffalo Safety Cover:
- Every Buffalo cover is computer designed and
cut to guarantee the best fit by maximizing
strength and appearance.
- Every Buffalo cover is delivered with a picture
of your pool and your name on the carton thereby
confirming that the cover was made specifically
for your pool.
- Every Buffalo cover is made to meet weather
conditions found only in Buffalo, NY
- Proudly made in Medina, NY USA
The Buffalo Cover is made with the best
materials around!
- Meets or exceeds American Society for Testing
and Materials (ASTM) standards.
- Triple stitched for maximum strength. (Most
manufacturers use only 2 rows of stitching).
Each Buffalo cover utilizes webbing top and
bottom throughout the cover. (Many manufacturers
have the double webbing only around the edge
and on each strap going into the cover only
18” to 24”).
- Strongest thread in the industry – DB92.
- All machining used to assemble the Buffalo
cover was custom made for HPI to insure the
finished product could not be manufactured any
better.
- Burst strength under testing conditions meets
or exceeds 385 pounds per square inch.
- Puncture strength equivalent to 100 pounds
with conventional object.
- 302 grade commercial rated stainless steel
springs have a compression load of 410 pounds
per springs.
- 3’ x 3’ grid Buffalo covers have
a 34 x 20 weave count.
- The special mesh material is rated for 100
gallons per square foot per minute under normal
installation.
- Warp abrasion (tensile strength over the length
of the cover) – 240 pounds.
- Fill abrasion (tensile strength over the width
of the cover) – 150 pounds.
|
|
 |
| A
$199.99 Value Do-It-Yourself Tool Kit FREE - With
the Purchase of a Buffalo Safety Cover! |
- 1/2" VSR Hammer Drill including belt
hook, side handle and depth gauge.
- 100' metal case chalk reel with 4 oz. marking
chalk.
- 16 oz. fiberglass handle, drop forged nailing
hammer.
- 1" x 25' quick find tape measure with
tape lock and return.
- 9 piece comfort grip hex key set.
- T-grip allen wrench.
- 16 piece long lasting white marking chalk.
- 1 oz, multi-purpose water-proof lubricant
sealant.
- Aircraft aluminum tamping tool.
- 1/2" x 50' roll of teflon tape.
- 3" x 3" wood block.
- Sample pack of decorative safety cover flanges.
- 6 Piece masonry drill bit set.
- Customized installation guide and instructions.
- 16" impact resistant toolbox with handled
insert and clear top compartments.
- Steel installation tool with maxi-grip rubberized
handle.
PLUS
MUCH MORE!!
We reserve the right to change
descriptions and specification based on product
availability at the time of sale.
|
Freight
charges may apply to any order being shipped by freight or denoted by
truck symbol.