Rx Clear® 12" Sand Filter System (Various Pump Sizes Available)

The Rx Clear® 12" Sand Filter System is designed to handle the filtration needs of many of today's pools and features a corrosion-resistant resin tank and a ½ HP (0.5 THP) pump. The hair and lint strainer equipped with the pump will simplify maintenance, and the 4-way automatic backwash valve on your filter tank. The included connection tee and hoses make adaptability for Intex and PTG simple. This pump and filter provides an efficient, easy-to-operate, simple-to-install system to keep your pool water clean and sparkling. This system is for pop-up pools only and should not be used for steel-sided pools. 

Note: Easily Adapts to Most Intex®, Bestway®, H2O®, Splash® Around & Coleman® Pools.

Pump Features:

• ½ HP (0.5 THP)
• 2.5 AMPS
• 60 Hz
• 115 Volts
• 37 GPM
• 3450 RPM

Filter Features:

• Sand capacity: 42 lbs
• 0.78 ft² filter area
• 50 PSI 
• 26 GPM
• 4-Way Valve

Benefits:

• Specially Designed: This pump and filter combination has been specifically designed for smaller above ground pools.
• All-in-One: This kit includes both a pump and a filter, designed to work together to provide streamlined performance.

Includes:

• 12" sand tank
• Energy efficient 0.5 THP motor & pump
• 4-way multiport valve
• Filter system base
• Hose adapters
• Universal Bestway Connection Tee
• Universal Intex Fittings 
• 3.5" long hoses (x3)
• Pump to filter hose 

DO NOT INSTALL OR OPERATE THIS PUMP UNLESS YOU HAVE READ AND FOLLOWED THE OWNER’S MANUAL, WHICH IS INCLUDED WITH THIS PUMP AND WHICH IS PUBLISHED ON THIS WEBSITE BY CLICKING ON THE LINK BELOW OR UNDER “MANUALS AND FORMS”. THE OWNER’S MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. FAILURE TO FOLLOW ALL INSTRUCTIONS IN THE OWNER’S MANUAL COULD RESULT IN SERIOUS INJURY, INCLUDING ELECTRICAL SHOCK, SUCTION ENTRAPMENT, AND EXPOSURE TO PRESSURE FIRE AND BURN HAZARDS. CHILDREN SHOULD BE SUPERVISED TO ENSURE THEY DON’T CLIMB ON THE PUMP.

THIS PUMP SHOULD BE INSTALLED AND SERVICED ONLY BY A QUALIFIED PROFESSIONAL. ALL WIRING MUST BE DONE BY A LICENSED ELECTRICIAN TO ENSURE COMPLIANCE WITH ALL STATE AND LOCAL CODES. FAILURE TO WIRE THE PUMP CORRECTLY COULD CAUSE AN ELECTRICAL SHOCK, DAMAGE THE PUMP MOTOR, AND VOID THE WARRANTY.