1' x 10' Enersol Solar Pool Heater w/ Hardware (Various Quantity)

Enersol's easy-to-install solar pool heating panels ensure warmer pool temperatures of up to 15°F, with no additional heating bills. The panels are the most durable available and undergo rigorous quality control testing. The Solarprene® rubber is completely resistant to pool chemicals, harsh UV rays, and extreme hot and cold temperatures.

Each box includes the installation hardware. They don't need to be put on the roof; they're so versatile that you can install them anywhere the sun shines. Here are some options: on the roof (home, pool changing room), on a rack, or on the ground.

They work by using your existing pool pump to pump pool water to the panels, which are heated by the sun to raise your water temperature. Their primary heat source comes from the sun. You won’t have to worry about costly monthly fuel bills after you install your solar pool heater. Water temperatures have increased an average of 10-15°F when the system is properly sized.

Note: An Enersol Installation Kit (not included) is required per system install, and additional parts are required for installation.

Features:

• Pumps water using your existing system
• Water temperature increases an average of 10º to 15ºF without increasing heating costs
• Completely resistant to pool chemicals, harsh UV rays, and extreme hot and cold temperatures
• Passes rigorous quality testing
• Panels are made of rubber, making them flexible and able to be walked on
• Versatile that can be put anywhere that it will get sunshine
• Easy installation
• The Enersol header connector (HEC) offers you the versatility to navigate around roof vents or skylights

Benefits:

• Durable: The Enersol Solar Pool Heater passed rigorous quality testing and is resistant to pool chemicals, harsh UV rays, and extreme hot and cold temperatures.
• Solar Heating: This heater can increase your pool temperature by 10º to 15ºF using free solar energy.

Includes:

• 1' x 8' panel
• Top mounting strap
• Cross-over strap
• 3 bolts
• 2 clips
• 2 O-rings

Additional parts required:

• PVC heavy-bodied cement
• 1½” - 2” elbows
• 1½” - 2” tees
• 1½” – 2” pipe
• Pipe hold downs (1½” and/or 2”)
• 1½” – 2” couplers
• Extra lag bolts
• 3-way manual valve or Automatic controller with 3-way valve
• One-way check valve
• 1½” – 2” ball valve
• Teflon tape