Swimline® Sand Filter Systems w/ Pump (Various Sizes)

The Swimline HydroTools Sand Filter System is designed for smaller above-ground swimming pools, including inflatable top-ring, frame, and rigid-wall styles. Its blow-molded PE tank has a 1,200-gallons-per-hour (GPH) pumping capacity and is designed to never rust.

Features:

• Complete, ready to install sand filter system
• 12-inch diameter blow-molded PE tank
• 42 lbs. sand capacity
• Complete debris trap with removable debris basket and see-through lid
• 4-way valve for Filter, Backwash, Rinse, and Waste operations

Benefits:

• Durable: The 12" diameter blow-molded PE tank is designed to last for seasons to come.
• Easy-to-Use: The complete debris trap with removable debris basket and see-through lid makes cleaning your filter a breeze.

Includes:

• Pump and Tank base
• Pressure gauge
• Hose clamps
• Drain plug
• Teflon tape
• All necessary hardware for assembly

Pump Specifications:

• 2.2 Amps
• 33 GPM
• 110 Volts
• 60 Hertz
• 0.3 HP
• 0.30 THP

Filter Specifications:

• 12" diameter
• For Pools Up To 9,000 gallons
• 42 lbs. Sand Capacity
• 4-Way Valve
• 26.4 Flow Rate
• 0.78 ft² Filter Area

DO NOT INSTALL OR OPERATE THIS PUMP UNLESS YOU HAVE READ AND FOLLOWED THE OWNER’S MANUAL, WHICH IS INCLUDED WITH THIS PUMP AND WHICH IS PUBLISHED ON THIS WEBSITE BY CLICKING ON THE LINK BELOW OR UNDER “MANUALS AND FORMS”. THE OWNER’S MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. FAILURE TO FOLLOW ALL INSTRUCTIONS IN THE OWNER’S MANUAL COULD RESULT IN SERIOUS INJURY, INCLUDING ELECTRICAL SHOCK, SUCTION ENTRAPMENT, AND EXPOSURE TO PRESSURE FIRE AND BURN HAZARDS. CHILDREN SHOULD BE SUPERVISED TO ENSURE THEY DON’T CLIMB ON THE PUMP.

THIS PUMP SHOULD BE INSTALLED AND SERVICED ONLY BY A QUALIFIED PROFESSIONAL. ALL WIRING MUST BE DONE BY A LICENSED ELECTRICIAN TO ENSURE COMPLIANCE WITH ALL STATE AND LOCAL CODES. FAILURE TO WIRE THE PUMP CORRECTLY COULD CAUSE AN ELECTRICAL SHOCK, DAMAGE THE PUMP MOTOR, AND VOID THE WARRANTY.