Swimline® Sand Filter Systems w/ Pump (Various Sizes)

The Swimline 14-Inch Sand Filter System - .35 HP is a complete and ready-to-install sand filter system. With a .35 horsepower motor that can have a 10,500 gallon per hour (GPH) capacity pump. A  manufactured blow-molded Polyethylene material that will never rust. This tank can hold a maximum of 60-lb sand capacity. 

Features:

• For pools up to 10,500 gallons
• Sand capacity of 60 pounds
• .35 HP (.43 THP)
• Power 110V/60HZ
• 4-way valve for (Filter, Backwash, Rinse, Waste, Recirculate and Closed operations)
• Two 1-1/2-inch diameter filter connection hoses 
• 1 valve to pump connection hose 
• Temperature control vents
• Components include: Tank, Pump, Filter Base, Multi-Port Valve, 3-Prong Plug & Power Cord

DO NOT INSTALL OR OPERATE THIS PUMP UNLESS YOU HAVE READ AND FOLLOWED THE OWNER’S MANUAL, WHICH IS INCLUDED WITH THIS PUMP AND WHICH IS PUBLISHED ON THIS WEBSITE BY CLICKING ON THE LINK BELOW OR UNDER “MANUALS AND FORMS”. THE OWNER’S MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. FAILURE TO FOLLOW ALL INSTRUCTIONS IN THE OWNER’S MANUAL COULD RESULT IN SERIOUS INJURY, INCLUDING ELECTRICAL SHOCK, SUCTION ENTRAPMENT, AND EXPOSURE TO PRESSURE FIRE AND BURN HAZARDS. CHILDREN SHOULD BE SUPERVISED TO ENSURE THEY DON’T CLIMB ON THE PUMP.

THIS PUMP SHOULD BE INSTALLED AND SERVICED ONLY BY A QUALIFIED PROFESSIONAL. ALL WIRING MUST BE DONE BY A LICENSED ELECTRICIAN TO ENSURE COMPLIANCE WITH ALL STATE AND LOCAL CODES. FAILURE TO WIRE THE PUMP CORRECTLY COULD CAUSE AN ELECTRICAL SHOCK, DAMAGE THE PUMP MOTOR, AND VOID THE WARRANTY.