Sun2Solar® Solar Pocket® Cover Holder

Keep from having to place your solar cover on your deck or the lawn where it could get dirty, muddy, or punctured from ground debris. Protect your cover with ease knowing it never has to touch the ground again with an easy and convenient way to store your solar cover while you're swimming! Simply attach the saddle pieces to the side of your pool and pull your cover to over to store until you're ready to put it back on.

Features:

• Approved for any size or thickness cover but may require adjustments
• Save space in comparison to a solar cover reel
• Designed with five aluminum U-shaped tubes that come with pre-drilled holes with U-hooks to post against the pool wall
• Installation is easy and can be altered to best fit your pool
• For steel pool walls only; do not use on any soft-sided or metal framed pool walls
• Includes everything necessary for install, including 5 hooks and steel mounts.

How To Measure for a Solar Pocket®

Sun2Solar^® Solar Pocket^® consists of five j-hooks that are evenly spread to conveniently hold any solar cover up and off of the ground. Metal brackets hold the j-hooks which hangs freely off of the top rail of a swimming pool. To visualize a good placement of the Sun2Solar^® Solar Pocket^®, simply lay your solar cover folded on the ground next to your swimming pool.

The Installation Process

Installing and assembling the Sun2Solar^® Solar Pocket^® is easy and only requires a few steps! Two bolts go into the pre-drilled holes of the top rail and through the mounting bracket which is then locked into place with two nuts. The Sun2Solar^® Solar Pocket^® is then placed inside of the mounting bracket and held in place with another bolt and a nut.

Solar Pocket Installed

Once fully assembled, the Sun2Solar^® Solar Pocket^® is ready to go and can hold any solar cover! You can see the image to the above to see what a fully assembled Sun2Solar^® Solar Pocket^® should look from the side and front.