1' x 8' Enersol Solar Pool Heaters w/ Hardware (Various Quantity)

Enersol's easy-to-install solar pool heating panels deliver up to 15°F warmer pool temperatures with no additional heating bills. The panels are the most durable available and undergo rigorous quality control testing. The Solarprene® rubber is completely resistant to pool chemicals, harsh UV rays, and extreme hot and cold temperatures.

Each Enersol panel is packaged in a 9" x 9" x 14" box, allowing for easy lifting onto your roof, and includes the necessary installation hardware. These solar panels are so versatile that you can install them anywhere the sun shines: on the roof, on a rack, or on the ground.

The panels use your existing pool pump to pump water into them, which are heated by the sun to raise your water temperature. Their primary heat source comes from the sun, meaning you don't need to worry about costly monthly fuel bills. Water temperatures increase by an average of 10 to 15ºF when the system is properly sized.

Note: An Enersol Installation Kit (not included) is required per system installation, and additional parts may be needed.

Features:

• Pumps water using your existing system
• Water temperatures increases an average of 10 - 15ºF
• Completely resistant to pool chemicals, harsh UV rays, and extreme hot and cold temperatures
• Passes rigorous quality testing
• Panels are made of rubber, making them flexible and able to be walked on
• Versatile, and can be put anywhere that gets sunshine
• Easy installation
• The Enersol Header Connector (HEC) offers you the versatility to navigate around roof vents or skylights

Benefits:

• Durable: The Enersol Solar Pool Heater passed rigorous quality testing and is resistant to pool chemicals, harsh UV rays, and extreme hot and cold temperatures.
• Solar Heating: This heater can increase your pool temperature by 10 - 15ºF using free solar energy

Each box includes: 

• 1 x 1' x 8'  panel
• 1 x Top Mounting 48' strap
• 1 x Cross-over 12' strap
• 3 x bolts
• 2 x clips
• 2 x O-rings

Additional parts required:

• PVC heavy-bodied cement
• 1 ½” - 2” elbows
• 1 ½” - 2” tees
• 1 ½” - 2” pipe
• Pipe hold downs (1 ½” and/or 2”)
• 1 ½” - 2” couplers
• Extra lag bolts
• 3-way manual valve or automatic controller with 3-way valve
• One-way check valve
• 1 ½” - 2” ball valve
• Teflon Tape