1' x 8' Enersol Solar Pool Heaters w/ Hardware (Various Quantity)

Enersol's easy-to-install solar pool heating panels ensure warmer pool temperatures of up to 15°F — with no heating bills. The panels are the most durable available and are put through rigorous quality control testing. The Solarprene® rubber is completely resistant to pool chemicals, harsh UV rays and extreme hot and cold temperatures.

Each Enersol Panel is packaged in a 9” x 9” x 14” box, allowing for lifting the panels to your roof without much effort. Each box includes the installation hardware. You don't need to put them on the roof, though. They're so versatile you can install them anywhere the sun shines. Here are some options: on the roof (home, pool change room), on a rack or on the ground.

They work by using your exisiting pool pump to pump pool water to the panels raising your water temperature. Their primary heat source comes from the sun. You won’t have to worry about costly monthly fuel bills after you install your solar pool heater. Water temperatures have increase an average of 10-15°F when system is properly sized.

Note: Enersol Installation Kit is required per system install (Not included). Additional parts reuiqred for installation.

Features:

• Pumps water using your existing system
• Water temperature increases an average of 10º to 15ºF without increasing heating costs
• Completely resistant to pool chemicals, harsh UV rays and extreme hot and cold temperature
• Passes through rigorous quality testing
• Panels are made of rubber making them flexible and are able to be walked on
• Versatile that can be put anywhere that it will get sunshine
• Easy installation
• The Enersol header connector (HEC) offers you the versatility to navigate around roof vents or skylights

Includes:

• 1' x 8' panel
• Top mounting strap
• Cross over strap
• 3 bolts
• 2 clips
• 2 O-rings

Additional parts required:

• PVC heavy bodied cement
• 1 ½” - 2” elbows
• 1 ½” - 2” tees
• 1 ½” – 2” pipe
• Pipe hold downs (1 ½” and/or 2”)
• 1 ½” – 2” couplers
• Extra lag bolts
• 3-way manual valve or Automatic controller with 3-way valve
• One way check valve
• 1 ½” – 2” ball valve
• Teflon tape